Murrindindi Ghost Gum Herringbone Mosaic Satin 280x325
Satin glass herringbone with veins borrowed from marble.
Murrindindi Ghost Gum Herringbone Mosaic Satin 280x325
A sample is one piece of this tile. Up to 5 per order for a flat A$15, posted.
The tile itself · SatinMurrindindi Ghost Gum Herringbone Mosaic 280x325, up close.
Crisp white bars, most marked with a thin grey vein, make up Murrindindi Ghost Gum, a satin glass herringbone mosaic on a 280 x 325 mm sheet. There is a little shade variation, so the white shifts bar to bar.
It is made in Italy, and a splashback or a laundry wall suits it. Mapei White leaves the grout line near invisible, so the herringbone zigzag reads as one pale, finely marked surface.
Grout to match Mapei Ultracolor Plus 100 White
Specified properly.
Specification
| Sheet | 280x325 mm |
|---|---|
| Format | Shaped |
| Finish | Satin |
| Colour | White |
| Material | Glass |
| Thickness | 6 mm |
| Edge | Rectified Square |
| Shade variation | V2 |
| Made in | Italy |
| Suitable for | Walls |
Grout colour
Near-invisible joint
100 White
Mapei Ultracolor Plus, for joints up to 20 mm.
Next closest: 111 Silver Grey
Measured from the tile photo against Mapei's colour chart and checked against the photo. Screens show colour differently, so check the grout against a real tile before you buy. Mapei colour chart
Laying notes
Keep a 2 to 3 mm joint and hold the same gap between sheets so the seams disappear. Lay a dry run first, and set out from the centre of the wall so the cut pieces at each edge match.
Order the full quantity at once
Shade can shift from one production batch to the next, so order your whole quantity, plus the allowance for cuts, in one go.
Delivery and returns
Delivery is calculated at checkout from your address. See the shipping policy and returns policy.
More like this.
The closest tiles in colour, format, size and finish.
