Kinglake Tidal Sand Mosaic Matt 48x98
Pale grey with soft marbled movement.
Kinglake Tidal Sand Mosaic Matt 48x98
A sample is one piece of this tile. Up to 5 per order for a flat A$15, posted.
The tile itself · 48×98 mm · MattKinglake Tidal Sand Mosaic, up close.
Soft marbling drifts across Kinglake Tidal Sand, a pale grey with a stone-look face. It is a matt porcelain rectangle, 48 x 98 mm, set on a 300 x 300 mm sheet in a brick bond, so a wall picks up the look of fine masonry.
Run it behind a kitchen sink as a splashback, or over a whole bathroom wall, with Mapei Manhattan 2000 as a close match that keeps the grout lines quiet. Window light shows off the marbling.
Grout to match Mapei Ultracolor Plus 110 Manhattan 2000
Specified properly.
Specification
| Size | 48x98 mm |
|---|---|
| Sheet | 300x300 mm |
| Format | Mosaic |
| Finish | Matt |
| Colour | Grey |
| Material | Porcelain |
| Suitable for | Walls |
Grout colour
Close match
110 Manhattan 2000
Mapei Ultracolor Plus, for joints up to 20 mm.
Next closest: 123 Ancient White
Measured from the tile photo against Mapei's colour chart and checked against the photo. Screens show colour differently, so check the grout against a real tile before you buy. Mapei colour chart
Laying notes
Keep a 2 to 3 mm joint and hold the same gap between sheets so the seams disappear. Lay a dry run first, and set out from the centre of the wall so the cut pieces at each edge match.
Order the full quantity at once
Shade can shift from one production batch to the next, so order your whole quantity, plus the allowance for cuts, in one go.
Delivery and returns
Delivery is calculated at checkout from your address. See the shipping policy and returns policy.
More like this.
The closest tiles in colour, format, size and finish.
